MicroMod SamD21J NRF
With a 32-bit ARM Cortex-M0 MCU, the ElectroSeed MicroMod SAMD21J NRF Processor Board provides a powerfull and versatile platform. With the NRF24L01 radio module and its ceramic antenna, make your wireless projecy easily with a maximum of inputs.
The ATSAMD21J18 used is a 32-bit ARM Cortex-M0, running at 48 MHz, has 256 KB of flash memory, 32 KB of SRAM, 6 SERCOM interfaces, and other features.
Number of inputs/outputs : 45 including 16 analog.
From 19,80 €
With a 32-bit ARM Cortex-M0 MCU, the ElectroSeed MicroMod SAMD21J NRF Processor Board provides a powerfull and versatile platform. With the NRF24L01 radio module and its ceramic antenna, make your wireless projecy easily with a maximum of inputs.
The ATSAMD21J18 used is a 32-bit ARM Cortex-M0, running at 48 MHz, has 256 KB of flash memory, 32 KB of SRAM, 6 SERCOM interfaces, and other features.
Number of inputs/outputs : 45 including 16 analog.
Pinout
Based on 0 reviews
Be the first to review “MicroMod SamD21J NRF”
Related products
-
MicroMod
MicroMod SamD21J
With a 32-bit ARM Cortex-M0 MCU, the ElectroSee MicroMod SAMD21 Processor Board provides you with a powerful development platform that has the highest numer of inputs/outputs in the Micromod familly.
The microcontroler used is an ATSAMD21J18, a 32-bit ARM Cortex-M0, running at 48 MHz, has 256 KB of flash memory, 32 KB of SRAM, 6 SERCOM interfaces, and other features.
Number of inputs/outputs : 50 including 20 analog.
SKU: 676 -
MicroMod
MicroMod SamD51
With a 32-bit ARM Cortex-M4F MCU, the SparkFun MicroMod SAMD51 Processor Board provides an economical and easy to use development platform if you're needing lots of power with minimal working space. With the M.2 MicroMod connector, connecting your SAMD51 Processor is a breeze. Simply match up the key on your processor's beveled edge connector to the key on the M.2 connector and secure it with a screw (included with all Carrier Boards). The SAMD51 is one of the most powerful and economical microcontrollers available so to be able to add it to your MicroMod Carrier Board is a huge advantage for your project!
The ATSAMD51J20 utilizes a 32-bit ARM Cortex-M4 processor with Floating Point Unit (FPU), running up to 120MHz, with 1 MB of flash memory, 256 KB of SRAM with ECC, 6 SERCOM interfaces, and other features
We have fixed a hardware bug on this board in order to be able to use the ADC for radiometric measures (potentiometers, etc.).
SKU: 606 -
MicroMod
MicroMod NRF52840
Featuring the nRF52840 SoC from Nordic Semiconductor, the SparkFun MicroMod nRF52840 Processor offers a powerful combination of ARM Cortex-M4 CPU and 2.4 GHz Bluetooth transceiver in the MicroMod form-factor with the M.2 MicroMod connector to allow you to plug in a compatible MicroMod Carrier Board with any number of peripherals.
The MicroMod nRF52840 Processor features the Raytac MDBT50Q-P1. This module includes an integrated trace antenna, fits the IC to an FCC and CE approved footprint along with including decoupling and timing mechanisms that would need to be designed into a circuit using the bare nRF52840 IC. The Bluetooth transceiver included on the nRF52840 boasts a BT 5.1 stack and supports Bluetooth 5, Bluetooth mesh, IEEE 802.15.4 (Zigbee & Thread) and 2.4Ghz RF wireless protocols (including Nordic's proprietary RF protocol) allowing you to pick which option works best for your application.
There's also two I2C buses, 2 SPI buses, eleven GPIO, dedicated digital, analog, PWM & PDM pins along with multiple serial UARTS to cover nearly all of your peripheral needs.
We have fixed a hardware bug on this board in order to be able to use the ADC for radiometric measures (potentiometers, etc.).
SKU: 605 -
MicroMod
MicroMod SamD21
With a 32-bit ARM Cortex-M0 MCU, the ElectroSee MicroMod SAMD21 Processor Board provides you with an economical and easy to use development platform. With the M.2 MicroMod connector, connecting your SAMD21 Processor is a breeze. Simply match up the key on your processor's beveled edge connector to the key on the M.2 connector and secure it with a screw (included with all Carrier Boards).
The ATSAMD21G18 used is a 32-bit ARM Cortex-M0, running up to 48 MHz, has 256 KB of flash memory, 32 KB of SRAM, 6 SERCOM interfaces, and other features. This MicroMod SAMD21 comes flashed with the UF2 bootloader.
SKU: 649
There are no reviews yet.