SimRacing
Showing 1–15 of 48 results
-
Accessories
Brace for TBB_01 board
Brace designed for the TBB_01 board, 3D printed with PLA.
Height : 19 à 25 mm
If you want to print it by yourself, you can download the files here :
http://www.electroseed.fr/downloads/EntretoiseQR_TBB01_19mm.STL
http://www.electroseed.fr/downloads/EntretoiseQR_TBB01_25mm.STL
SKU: 153 -
Quick Release
Charge station
Charge station for the Quick Releases with USB-C connector
2 connexion options are proposed :
– A 2-pin connector allows you to transmit power coming from the USB connector (no data connexion).
– A min-din 6 pins allows you to transmit power and data coming from the USB connector.
Base bolt centers: 6×70 mm
Through-hole, diameter 5 mm
Pinout of the Mini-Din connector:
Vcc : RedGnd : BlackMiso : WhiteSS : GreenSKU: 624 -
Thrustmaster, Thrustmaster
DIY Kit Hub + board for Thrustmaster bases
Kit allowing the build of a DIY wheel for Thrusmaster bases. The board can be connected directly to the base to communicate natively, send up to 30 inputs (26 buttons/encoders/etc and a hat switch) and receive Leds information (15 leds, only on bases supporting it, like T300 or TS-PC Racer) by emulating a Thrustmaster Ferrari 488 Challenge Edition wheel. If you need more inputs or if you want to manage leds in RGB with SimHub, you will have to get the power supply from the base by using a printed ub, a SamD21 WB radio and a NRF Dongle plugged in the PC. Note : Thrustmaster bases give only a 3.3V power supply and the bases we've tested are not powerful enough to power a Nextion screen (even with a 5V booster).
Kit contents :
– hub printed in PLA compatible with Thrustmaster bases
– SamD21 WB TM board
– USB-C extension, so you'll be able to recharge the battery or reprogram the NRF52840 board without having to open your wheel.
– 10 20 cm dupont cables and 10 10 cm dupont cables so you can connect your buttons, rotary encoders, etc.
SKU: 663 -
Fanatec, Fanatec
Fanatec LeoXZ Quick Release
LeoXZ Quick Release with connector and 6 x 70mm M5 tapped holes, for Fanatec wheel bases, compatible with all bases :
- Podium DD1 and DD2
- CSL DD
- ClubSport Wheel all versions 1, 2 and 2.5
- CSL Elite Xbox and PS4 versions
- Older CSL
We have modified the output connector to a JST PH 8 pins in order to be able to connect to our MMWB boards.
Combined with a MMWB board, it will allow you to build customised wheels by emulating an official Fanatec wheel (BMW or Formula V2), to activate the FFB and to access to features like real time FFB tweaking, led display, etc…
SKU: 673 -
-
Quick Release
Fanatec SRM Quick Release
Quick Release with Sim Racing Machines connector and adaptation plate with 4 x 70mm M5 tapped holes, for Fanatec wheel bases, compatible with all bases :
- Podium DD1 and DD2
- ClubSport Wheel all versions 1, 2 and 2.5
- CSL Elite Xbox and PS4 versions
- Older CSL
Combined with a MMWB board, it will allow you to build customised wheels by emulating an official Fanatec wheel (BMW or Formula V2), to activate the FFB and to access to features like real time FFB tweaking, led display, etc…
SKU: 446 -
