Gear box
Showing all 3 results
-
Gear box
USB Adapter for G25/G27 Shifter
Logitech G25 / G27 shifter USB adapter. This adapter can also be used to make a custom sequential or H shifter.
All the buttons and gears, including reverse, are read. The shifter type is automatically detected, and on the G25, sequential mode is handled.
Uses the principle of an XY position of the lever to process the engaged gear. See the "Tutorials" tab on this page for the calibration process.
Effective Resolution: 12 bits Minimum (4096 positions) on all axes, refreshed and filtered at 250 Hz.
Connector : USB-C
Cable length: 25 cm
An internal calibration is needed on each gear.
This adapter does not require drivers and is natively supported by Windows 10/8/7, Vista 32, Vista 64, XP, 2000, Me, 98, Mac OS X and Linux.
Based on the SamD21 micro-controler, this adapter exposes 6 analog inputs, one serial port, one I2C port and one SPI port (input only). So it can be used to connect several different sensors : one AS5600, several MLX90393.
SKU: 496 -
Gear box
USB Adapter for G25/G27/G29 Shifter
Logitech G25 / G27 / G29 shifter USB adapter. This adapter can also be used to make a custom sequential or H shifter.
All the buttons and gears, including reverse, are read. The shifter type is automatically detected, and on the G25, sequential mode is handled.
Uses the principle of an XY position of the lever to process the engaged gear. See the "Tutorials" tab on this page for the calibration process.
Effective Resolution: 12 bits Minimum (4096 positions) on all axes, refreshed and filtered at 250 Hz.
Connector : USB-C
Cable length: 25 cm
An internal calibration is needed on each gear.
This adapter does not require drivers and is natively supported by Windows 10/8/7, Vista 32, Vista 64, XP, 2000, Me, 98, Mac OS X and Linux.
Based on the SamD21 micro-controler, this adapter exposes 6 analog inputs, one serial port, one I2C port and one SPI port (input only). So it can be used to connect several different sensors : one AS5600, several MLX90393.
SKU: 507 -
Gear box
USB Adapter for G27 Shifters
Logitech G27 shifter USB adapter. This adapter can also be used to make a custom sequential or H shifter.
All the buttons and gears, including reverse, are read.
Uses the principle of an XY position of the lever to process the engaged gear. See the "Tutorials" tab on this page for the calibration process.
Effective Resolution: 12 bits Minimum (4096 positions) on all axes, refreshed and filtered at 250 Hz.
Connector : USB-C
Cable length: 25 cm
An internal calibration is needed on each gear.
This adapter does not require drivers and is natively supported by Windows 10/8/7, Vista 32, Vista 64, XP, 2000, Me, 98, Mac OS X and Linux.
Based on the SamD21 micro-controler, this adapter exposes 6 analog inputs, one serial port, one I2C port and one SPI port (input only). So it can be used to connect several different sensors : one AS5600, several MLX90393.
SKU: 443
