Mini Angle sensor AS5600
7 in stock
Contactless AS5600 12 bits angle sensor, delivered with a magnet.
Allows you to make pedals or any other element requiring a robust angle sensor.
The angle range can be 360° but can also be reduced down to 18° while keeping the full precision of the sensor.
Available interfaces are analog or I2C.We recommend I2C, since it allows to do the sensor calibration (choice of the angle interval), and also the signal will be more protected against noise.
0,00 € TTC
Power voltage : 3.3V
Board dimensions: 20 mm x 17 mm, thickness 4mm
Magnet dimension : Diameter 6mm, height 2.5 mm
Documentation : http://www.electroseed.fr/docs/AS5600.pdf
Node Blue example : https://www.electroseed.fr/shop/gui/index.php?file=examples/06-Sensors/AS5600_HID.txt
| Weight | 0,002 kg |
|---|---|
| Dimensions | 1 × 1 × 1 cm |
Schematics
Pinout
Top View :
Related products
-
Sensors
Angle sensor AS5600 ElectroSeed
Contactless AS5600 12 bits angle sensor, delivered with a magnet.
Allows you to make pedals or any other element requiring a robust angle sensor.
The angle range can be 360° but can also be reduced to 18° while keeping the full precision of the sensor.
Available interfaces are analog or I2C.
SKU: 346 -
Sensors
Linear Magnetic Sensor DRV5053RA
This hall effect linear magnetic sensor senses a magnetic field and produces a voltage proportionnal to the field, centered at 1V. It enables to replace potentiometers for analog commands, avoiding any mechanical wear.
If you have a board that is already programmed for potentiometers, you can replace them with this type of sensor without reprogramming the board (but pay attention to the wiring which is different).
Sensitivity : 47mV/mT / 4.7mV/Gauss
Supply voltage : from 2.7 to 38 Vdc
Data Sheet : https://www.electroseed.fr/docs/DRV5053.pdf
SKU: 666 -
Sensors
Linear Magnetic Sensor SS49ZE
This hall effect linear magnetic sensor senses a magnetic field and produces a voltage proportionnal to the field, centered at Vcc/2.
This sensor enables to replace potentiometres for analog commands, avoiding any mechanical wear.
If you have a board that is already programmed for potentiometers, you can replace them with this type of sensor without reprogramming the board (but pay attention to the wiring which is different).
Sensitivity : 1.4 mV/Gauss
Supply voltage : from 2.7 to 6.5 Vdc
Data Sheet : https://www.electroseed.fr/docs/SS49E-hall-sensor.pdf
SKU: 234
