Angle sensor AS5600 ElectroSeed
28 in stock
Contactless AS5600 12 bits angle sensor, delivered with a magnet.
Allows you to make pedals or any other element requiring a robust angle sensor.
The angle range can be 360° but can also be reduced to 18° while keeping the full precision of the sensor.
Available interfaces are analog or I2C.
4,80 € incl. VAT (4,00 € excl. VAT)
28 in stock
We recommend I2C, since it will give a better precision if the angle interval is reduced, and also the signal will be more protected against noise.
In analog mode, if you have a board that is already programmed for potentiometers, you can replace them with this type of sensor without reprogramming the board (but pay attention to the wiring which is different).
- Power voltage :3.3V
- Board dimensions: 22.6 mm x 23.2 mm, thickness 3.2 mm (including pcb and components)
- Magnet dimension : Diameter 6mm, height 2.5 mm
- Magnet to sensor distance : min 0 mm, max 5 mm
Documentation : http://www.electroseed.fr/docs/AS5600.pdf
Node Blue example (i2C) : https://www.electroseed.fr/shop/gui/index.php?file=examples/06-Sensors/AS5600_HID.txt
| Weight | 0,01 kg |
|---|---|
| Dimensions | 1 × 1 × 1 cm |
Schematics
Pinout
Top View :
Jumper SJ1 : Power supply choice
soldered => 3.3V
not soldered => 5V
Jumper SJ2 : Programming of the angle range
soldered => with OUT pin (see documentation page 23 and 32)
not soldered => with I2C interface (see documentation page 22,24 and 32)
Related products
-
Sensors
Mini Angle sensor AS5600
Contactless AS5600 12 bits angle sensor, delivered with a magnet.
Allows you to make pedals or any other element requiring a robust angle sensor.
The angle range can be 360° but can also be reduced down to 18° while keeping the full precision of the sensor.
Available interfaces are analog or I2C.We recommand I2C, since it allows to do the sensor calibration (choice of the angle interval), and also the signal will be more protected against noise.
Power voltage : 3.3V
Board dimensions: 20 mm x 17 mm, thickness 4mm
Magnet dimension : Diameter 6mm, height 2.5 mm
Documentation : http://www.electroseed.fr/docs/AS5600.pdf
Node Blue example : https://www.electroseed.fr/shop/gui/index.php?file=examples/06-Sensors/AS5600_HID.txt
SKU: 352 -
Sensors
Linear Magnetic Sensor DRV5053RA
This hall effect linear magnetic sensor senses a magnetic field and produces a voltage proportionnal to the field, centered at 1V. It enables to replace potentiometers for analog commands, avoiding any mechanical wear.
If you have a board that is already programmed for potentiometers, you can replace them with this type of sensor without reprogramming the board (but pay attention to the wiring which is different).
Sensitivity : 47mV/mT / 4.7mV/Gauss
Supply voltage : from 2.7 to 38 Vdc
Data Sheet : https://www.electroseed.fr/docs/DRV5053.pdf
SKU: 666 -
Sensors
Linear Magnetic Sensor SS49ZE
This hall effect linear magnetic sensor senses a magnetic field and produces a voltage proportionnal to the field, centered at Vcc/2.
This sensor enables to replace potentiometres for analog commands, avoiding any mechanical wear.
If you have a board that is already programmed for potentiometers, you can replace them with this type of sensor without reprogramming the board (but pay attention to the wiring which is different).
Sensitivity : 1.4 mV/Gauss
Supply voltage : from 2.7 to 6.5 Vdc
Data Sheet : https://www.electroseed.fr/docs/SS49E-hall-sensor.pdf
SKU: 234
