Shop
Showing 181–195 of 226 results
-
- Out of stock -Display
Red 7 segment display 3 digits HC595
Based on the 74HC595 chipset, 1 digital output and a SPI port are required to drive this display. Can be chained with several display of the same type.
Display Dimensions : 39 mm x 19 mm, height 8 mm
Total Dimensions with pcb : 51.5 mm x 25 mm, height 12 mm
Power supply voltage : 3.3V -> 5V
SKU: 420 -
Leds
RGB Led WS2812B
Standard analog RGB leds require 4 wires per LED and PWM signals to modulate their intensity, so applications with many of those leds are complicated to implement and require a lot of pins on your MCU, or an additionnal IC.
WS2812B leds are RGB leds that integrate a logic circuit with a serial port/bridge. Their connection is very simple since only 3 wires are needed to drive a group of several dozens of leds connected to each other, each led being independently controllable in color and intensity !
Diameter : 9.6 mm
SKU: 195 -
Rotary Switches
Rotary Switch 12 Positions
Rotary Switch 12 positions, 1 pole (from 2 to 12 position for the blocked version)
Raw product, without pcb.
The special washer that is provided with the blocked version enables to set the number of positions between 2 and 11 (without the washer you’ll have 12 positions).
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.shop.electroseed.fr/en/categorie-produit/components/plastic-knobs
SKU: 221-22 -
Rotary Switches
Rotary Switch 12 Positions + PCB
Rotary Switch 12 positions (from 2 to 12 position for the blocked version)
Soldered on a circuit board specially developed by us, this rotary switch only uses an analog input and needs only 3 wires: 2 for the power supply and one for the analog output.
The special washer that is provided with the blocked version enables to set the number of positions between 2 and 11 (without the washer you’ll have 12 positions).
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.shop.electroseed.fr/en/product-category/components/
SKU: 221 -
Rotary Switches
Rotary Switch 5 Positions
Rotary Switch 5 positions
Soldered on a circuit board specially developed by us, this rotary switch only uses an analog input and needs only 3 wires: 2 for the power supply wires and one for the analog output.
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.shop.electroseed.fr/en/product-category/components/
Thanks to the Node Blue module specific to this product, you can very easily integrate it into your projects : https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/Digipot_B5.txt
SKU: 267 -
Rotary Switches
Rotary Switch 8 Positions
Rotary Switch 8 positions
Soldered on a circuit board specially developed by us, this rotary switch only uses an analog input and needs only 3 wires: 2 for the power supply wires and one for the analog output.
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.shop.electroseed.fr/categorie-produit/composants/capuchons-plastique
Thanks to the Node Blue module specific to this product, you can very easily integrate it into your projects : https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/Digipot_B8.txt
SKU: 222 -
Radio
Seeed Studio XIAO BLE
The Seeeduino XIAO BLE board brings you the power of a nRF52840 in one of the smallest form factor, and allows to deploy wireless projects at a small cost. It includes a Texas Instrument BQ24101 battery charging circuit, and the battery charge level can be measured.
Thanks to Node Blue, this board enables connecting buttons, switches, encoders, potentiometers, rotary switches, joysticks and various sensors.
SKU: 613
