Shop
Showing 256–270 of 310 results
-
-
Rotary Switches
Rotary Switch 2-12 Positions
Rotatry Switch 2-12 positions
Soldered on a circuit board specially developed by us, this rotary switch only uses an analog input and needs only 3 wires: 2 power supply wires and the analog output.
Thanks to the Node Blue module specific to this product, you can very easily integrate it into your projects.
The special washer that is provided enables to set the number of positions between 2 and 11 (without the washer you'll have 12 posisitions). Of course this is only available if you don't choose the "Infinite Rotation" option.
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.electroseed.fr/shop/index.php?cPath=12_62
WARNING : We don't provide any source code to use this product, we recommend to use NodeBlue which proposes a dedicated module.
This example will help you to get started easily: https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/Digipot_B12.txt
SKU: 221 -
Rotary Switches
Rotary Switch 2-12 Positions Blocked
Rotatry Switch 2-12 positions, 1 pole.
Raw produt, without pcb.
Thanks to the Node Blue module specific to this product, you can very easily integrate it into your projects.
The special washer that is provided enables to set the number of positions between 2 and 11 (without the washer you'll have 12 posisitions).
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.electroseed.fr/shop/index.php?cPath=12_62
SKU: 579 -
Rotary Switches
Rotary Switch 5 Positions
Rotatry Switch 5 positions
Soldered on a circuit board specially developed by us, this rotary switch only uses an analog input and needs only 3 wires: 2 power supply wires and the analog output.
Thanks to the Node Blue module specific to this product, you can very easily integrate it into your projects.
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.electroseed.fr/shop/index.php?cPath=12_62
WARNING : We don't provide any source code to use this product, we recommend to use NodeBlue which proposes a dedicated module
This example will help you to get started easily: https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/Digipot_B5.txt
SKU: 267 -
Rotary Switches
Rotary Switch 6 Positions
Rotatry Switch 6 positions
Soldered on a circuit board specially developed by us, this rotary switch only uses an analog input and needs only 3 wires: 2 power supply wires and the analog output.
Thanks to the Node Blue module specific to this product, you can very easily integrate it into your projects.
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.electroseed.fr/shop/index.php?cPath=12_62
WARNING : We don't provide any source code to use this product, we recommend to use NodeBlue which proposes a dedicated module.
This example will help you to get started easily: https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/Digipot_B6.txt
SKU: 266 -
Rotary Switches
Rotary Switch 8 Positions
Rotatry Switch 8 positions
Soldered on a circuit board specially developed by us, this rotary switch only uses an analog input and needs only 3 wires: 2 power supply wires and the analog output.
Thanks to the Node Blue module specific to this product, you can very easily integrate it into your projects.
Drill size : 9 mm
You can choose your knob in this category (except D hole) : https://www.electroseed.fr/shop/index.php?cPath=12_62
WARNING : We don't provide any source code to use this product, we recommend to use NodeBlue which proposes a dedicated module.
This example will help you to get started easily: https://www.electroseed.fr/shop/gui/index.php?file=examples/02-Digital/Digipot_B8.txt
SKU: 222 -
Radio
Seeed Studio XIAO BLE
The Seeeduino XIAO BLE board brings you the power of a nRF52840 in one of the smallest form factor, and allows to deploy wireless projects at a small cost. It includes a Texas Instrument BQ24101 battery charging circuit, and the battery charge level can be measured.
Thanks to Node Blue, this board enables connecting buttons, switches, encoders, potentiometers, rotary switches, joysticks and various sensors.
Attention, this board uses an USB-C connector.
SKU: 613 -
Kits
Simagic Radio NRF52840 Kit
This kit allows you to build a radio link for your steering wheel. The embedded board and the dongle are based on the NRF52840 microcontroler.
Kit contents :
– NRF52840 Feather Express board with its printed plate and an external led with connector
– NRF52Dongle (option)
– µUSB extension , so you'll be able to recharge the battery or reprogram the NRF52840 board without having to open your wheel.
– 1 power switch to switch the wheel off and save battery life.
– 10 20cm dupont cables and 10 10cm dupont cables so you can connect your buttons, rotary encoders, etc.
SKU: 572 -
Quick Release
Simagic/Moza Compatible Zenky Quick Release
Aluminum Zenky Quick Release, Male + female part, compatible with Simagic/Moza Wheel bases.
Machined with precision, this revolutionary QR is compact, lightweight, and extremely reliable. Unlocking is done simply by pulling the ring that surrounds the QR.
This QR can be mounted directly with standard wheels (70mm inter-axis distance).
3 connection options are proposed :
– The default 2-pin connector allows you to transmit power coming from a Thrustmaster, Fanatec or other Wheel bases.
– A spring loaded connector allows to get the power from Simagic or Moza Racing Wheel bases.
– A min-din 6 pins allows you to transmit power and data coming from a Thrustmaster Wheel base.
Dimensions:
Height: 62 mm
Outside Diameter: 88 mm
Hub and Flywheel bolt centers: 6×70 mm and 6x74mm
Female part : M5 threaded holes, depth 12 mm
Male part : through-hole, diameter 5.5 mm
SKU: 359 -
Quick Release
Simagic/Moza Compatible Zenky Quick Release (Female part)
Female part for Zenky Quick Releases, compatible with Simagic/Moza Wheel bases.
This QR can be mounted directly with standard wheels (70mm inter-axis distance).
3 connection options are proposed :
– The default 2-pin connector allows you to transmit power coming from a Thrustmaster, Fanatec or other Wheel bases.
– A spring loaded connector allows to get the power from Simagic or Moza Racing Wheel bases.
– A min-din 6 pins allows you to transmit power and data coming from a Thrustmaster Wheel base.
Hub and Flywheel bolt centers: 6×70 mm and 6×74 mm
M5 threaded holes, depth 12 mm
SKU: 365
